Menu

Introduction

ST50HE integrates ARM Cortex®-M4 (32-bit RISC core operating at a 48MHz frequency) MCU with LoRa modulation. It offers an ultra-long-range spectrum communication and high interference immunity simultaneously minimizing power consumption.

The ST50HE can achieve a sensitivity under -136 dBm. It has high sensitivity and combined with the integrated +14 dBm power amplifier yields. The industry-leading link makes it optimal for any low data rate application. LoRa also provides significant advantages in both blocking and selectivity over conventional modulation techniques. Solving traditional issues between range, interference immunity, and power consumption.


Partnership & Certification

LoRa Alliance   sigfox Partnership  
 
 

Technical Support

ST50HE integrates 

AcSiP has a stronger support chain in technical service which included FAE,HW,SW,PE resource involved.

1)HW

  • SiP Module

Those Tabpages of ‘Specification’, ‘HDK’ could be refered to know this product further well.

  • Validation & Certification

AcSiP has accumulated lots of experience in wireless communication and provide solution of RF design and protocol survey to help clients’ products meet local regulation and join global ecosystem well. From project deveoping to product getting certification approval, even know-how in deployment stage,we has collected useful data here for user reference. 

        


2)SW

   We have developed sigfox support resource to service clients for another LPWAN ecosystem.

                

        AcSiP provide kinds of software for ST50X series product,ST50H/ST50HE/AI50H/ST50L,to develop IoT relevant applications.

         There are main LoRa examples within above SW packages show behind.

          ♦  Essential Configuration and Commands Set reference

          ♦  Essential Configuration and Commands Set reference

             •  LoRaWAN_AT_Slave

             •  LoRaWAN_AT_Slave_Peripheral

             •  LoRaWAN_End_Node

             •  SubGHz_Phy_PingPong


3)Training & E-Service

    FAE is first layer to handle all technical events or service demand. Clients and customers could ask help via familiar channel or sales host to get positive response efficiency or check out online E-Service window finding the relevant resource as well. AcSiP has prepared those data for products in technical support or training courses.


Related Resource

⇒   
⇒   
⇒   
⇒   
⇒   

Related Products

ST50H

High Band / High Power / LoRa SoC SiP

EK-ST50H KIT

High Band / High Power / LoRa SoC SiP

ST50HE

High Band / Low Power / LoRa SoC SiP

EK-ST50HE KIT

High Band / Low Power / LoRa SoC SiP

ST50L

Low Band / High Power / LoRa SoC SiP

EK-ST50L KIT

Low Band / High Power / LoRa SoC SiP

AI50H

LoRa SoC SiP

 

 

 

 


For more information, or for sales inquiries, please contact  AcSiP Technology Corp.

General Description

The ST50HE integrates ARM Cortex®-M4 (32-bit RISC core operating at a 48MHz frequency) MCU with LoRa modulation that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

The ST50HE can achieve a sensitivity of over -136 dBm. The high sensitivity combined with the integrated +14 dBm power amplifier yields industry leading link budget making it optimal for any low data rate application requiring range or robustness. LoRa also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

Part Number Frequency Range Spreading Factor Bandwidth Effective Bitrate Est. Sensitivity
ST50HE 863~930MHz 5~12 7.8~500KHz LoRa BR: 0.013~17.4 kb/s -138 dBm
Kb/s(G)FSK BR:0.6~300kb/s @125kHz, SF12

Block diagram 

                              


Key-feature

► Compact siz with MCU, clock source and sub-GHz radio inside: 12mm x 12mm x 1.22mm(Typ.)
► High performance 32-bit microcontroller: ARM Cortex M4
► Ultra-low power with various consumption levels (Min 1uA@Stop 2 mode)
► STM32 Security: HW encryption 256 AES, PKA, RNG, 64-bit UID, 96-bit
► Embedded sub-GHz transceiver based-on Semtech SX126x
► Ecosystem support: LoRaWAN, sigfox
► IoT and Smart-metering (Wireless M-Bus, DLMS) applications
► Embedded memoryies(256 KB of Flah and 64 KB of RAM)

Power supply scheme

                          


Pin Assignment & Recommend Footprint

The SiP module will conform to the following pin map (Top View) and recommend footprint (mm)

                         


Recommend Reflow Profile

                         


Related Resource

⇒   
⇒   
⇒   
⇒   
⇒   

Related Products

ST50H

High Band / High Power / LoRa SoC SiP

EK-ST50H KIT

High Band / High Power / LoRa SoC SiP

ST50HE

High Band / Low Power / LoRa SoC SiP

EK-ST50HE KIT

High Band / Low Power / LoRa SoC SiP

ST50L

Low Band / High Power / LoRa SoC SiP

EK-ST50L KIT

Low Band / High Power / LoRa SoC SiP

AI50H

LoRa SoC SiP

 

 

 

 


For more information, or for sales inquiries, please contact  AcSiP Technology Corp.

General Description

 

The EK-ST50HE KIT board provides an affordable way for user to try out LPWAN IoT applications or new concepts evaluation. It also compliance with STM32WL Nucleo-64 board to support ARDUINO Uno V3 connectivity support and the ST morpho headers.

User can download firmware built from SDK via ST-Link to test software flow and debug error according to log shown on termanal tool.


Development Kit Package Information

Item Count Description
EK-ST50HE KIT 1 Micro USB for Power source and RS232 I/F
Antenna (option) 1 High band for EU868

Operation Instruction

    Developers could refer to behind figure for essential resource layout then has a survey and implement in their product cases

Step Info:

                            


EK-ST50 series PCB Connector Description

                 


RF Layout Guide

    Application note have showed essential RF layout info for developer reference and make certification approval easier.

►Harmonic suppression

    Whether a harmonic suppression circuit is needed, depends on the EMI test result.

    Default value is L102=8.2nH Murata LQW15AN, C125=3.3pF, C126=3.3pF.

                            

►ESD Protection   

    If used in a harsh ESD environment, the following example is reference design for ESD Protection,

    the recommended part is:  Semtech@Rclamp2451z (1-Line, 24V)

                            


Engineer Service

    AcSiP provide HW/SW relevant engineer service for clients in module design phase and its technical resource has shown on each individual tab page also.Additionally, we have provided those design review serive before the engineer sample came out even debugged for revised one and the clent can ask our sales window, E-Service for this help.

  • Schematic review
  • Layout review in RF matching、PCB antenna simulation
  • Certification test manual
  • Field test and deployment consultant (option)
  • Customized module demand (option)

Related Resource

⇒   
⇒   
⇒   
⇒   
⇒   

Related Products

ST50H

High Band / High Power / LoRa SoC SiP

EK-ST50H KIT

High Band / High Power / LoRa SoC SiP

ST50HE

High Band / Low Power / LoRa SoC SiP

EK-ST50HE KIT

High Band / Low Power / LoRa SoC SiP

ST50L

Low Band / High Power / LoRa SoC SiP

EK-ST50L KIT

Low Band / High Power / LoRa SoC SiP

AI50H

LoRa SoC SiP

 

 

 

 


For more information, or for sales inquiries, please contact  AcSiP Technology Corp.

 

Item Description Download Link
Application Note ST50HE_ApplicationNote_Ver.C.pdf LoginContact Us
EVK User Guide EK-ST50_User_Guide_Ver.H.pdf Free
Footprint ST50X_Footprint.7z LoginContact Us
Commands Set Reference ST50 Commands Set Reference v1.2.1_20220720.pdf LoginContact Us
Item Description Download Link
Contact
Theme item*:
Top