- QHow to implement the S76S ADC function for developer?
S76S provide ADC developing platform and you could link the following for detailed usage and refer to S7678S_Commands_Set_Reference_A_1.0.4.pdf:
- QHow many free GPIO pins of S76S for SW developing?
S76S/S78S has 62 pins out .In addition to NC’ GND’ VDD’ NRST’ PA_1’ SWD.. there are more than 15 pins for SPI’ I2C’ UART’ ADC defined using. Please refer to below file for detail. S7678S_SDK_Manual_A.pdf STM32L0x3_Reference_Manual_en.DM00095744.pdf
- QCan S76S join any Gateway solution?
S76S has approved LoRaWAN Certification and it can join any compliant ANNWS.01.2.1.W.SYS Gateway solutions, they are just like Semtech Starter’ Multitech’ Gemtek’ Taifatech’ RisingHF … and there are more gateways will be test for this compliant integration.
- QDoes the driver need to control PA_1? If so for what purpose / how?
PA_1 pin is a GPIO control for Power Amplifier enable.
That is designed at our EK-S76SXB for special application. (See below)
- QCan S76S provide interfaces for sensors integrated without extra MCU?
They can refer to S7678S_SDK_Manual_A.pdf for knowing well.
