Menu
  • EK-S68F

    LoRa_SiP + ANT

S68F_Brief(EN)_Ver.02.pdf Download S68F_SPEC_EN_Ver.B-website.pdf Download

Introduction

The AcSiP S68F transceiver features the LoRa long range modern that provides ultra-long range spread spectrum communication and high interference immunity whist minimizing current consumption.
The S68F can achieve a sensitivity of over -138 dBm using a TCXO and related bill of materials. The high sensitivity combined with the integrated +22 dBm(max.) power amplifier yields industry leading link budget making it optimal for any low data rate application requiring range or robustness. LoRa  also provides significant advantages in both blocking and selectivity over conventional modulation techniques,solving the traditional design compromise between range,interference immunity and energy consumption.


Block diagram 


Key-feature

。Small size: 9 mm x 8 mm x 1.26 mm (Typ.)
。LoRa Transceiver Module, +22 dBm Max. RF output power
。Programmable bit rate up to 62.5 kbps LoRa
。Programmable bit rate up to 3000 kbps FSK
。High sensitivity: down to -138 dBm (@125KHz, SF12)
。Embedded TCXO of 32MHz

For more information, or for sales inquiries, please contact  AcSiP Technology Corp.

General Description

The AcSiP S68F transceiver features the LoRa long range modern that provides ultra-long range spread spectrum communication and high interference immunity whist minimizing current consumption.
The S68F can achieve a sensitivity of over -138 dBm using a TCXO and related bill of materials. The high sensitivity combined with the integrated +22 dBm(max.) power amplifier yields industry leading link budget making it optimal for any low data rate application requiring range or robustness. 
LoRa also provides significant advantages in both blocking and selectivity over conventional modulation techniques,solving the traditional design compromise between range,interference immunity and energy consumption.

Part Number Frequency Range Spreading Factor Bandwidth Est. Sensitivity
S68F 433~510MHz 5~12 7.8~500KHz -138dBm
        @125kHz, SF12

Electrical Characteristics

Power Consumption Specification

Symbol Parameter Conditions Typ. Max. Unit
IDDSL Supply current in Sleep mode   0.55 0.6 uA
IDDSBR Supply current in Standby RC mode TCXO OFF 0.58   mA
IDDSBT Supply current in Standby XOSC mode TCXO ON 1.9   mA
IDDR Supply current in Receive mode RX Boosted LoRa 125kHz 5.7   mA
  Supply current in Transmit mode with RF SetPW = +22dBm 112 115  
IDDT impedance matching RF SetPW = +20dBm 99   mA
    RF SetPW = +17dBm 81    
    RF SetPW = +14dBm 65    
 

 

Pin Information Recommand Reflow Profile
   

 

 


Get Document Here

Item Description Download
Databrief S68F_Brief(EN)_Ver.02.pdf
Datasheet S68F_SPEC(EN)_Ver.B-website.pdf

For more information, or for sales inquiries, please contact AcSiP Technology Corp.

General Description

   

 

The EK-S68F board provides an affordable way for user to try out LoRaTM transceiver functionality or new concepts evaluation. It also compliance with XBee board formfactory to support sensor node application in wireless connectivity feature.

 


User can use it integrated existed host mcu controled by SPI to provide wireless connectivity feature in sensor node application for sure.


Package Information

Item Count Description
EK-S68F 1 SPI for host control interface
Antenna (option) 1 High band for LoRa WAN CN470, EU433

 

SW & Tools Pin Definition
User can referl to application note to know how S68F usage in design phase and example SDK or firmware  for SPI driver and LoRaMAC control verify.  

SPI

DIO_1 / BUSY

RF_VC1 / RF_VC2


Get Document Here

Item Description Download
User guide EK-S68F_UserGuide_Ver.A.pdf
Application note S68F_ApplicationNote(EN)_Ver.D.pdf

For more information, or for sales inquiries, please contact AcSiP Technology Corp.

Item Description Download Link
Item Description Download Link
S68F Reliability Test S68F Reliability test report Free
S68F REACH/RoHS S68F compliance declaration Free
EK-S68F REACH/RoHS EK-S68F REACH/RoHS Free
Contact
Theme item*:
Top