Menu
  • EK-S62F

    LoRa_SiP + ANT

Introduction

The AcSiP S62F transceiver features the LoRaTM long range modern that provides ultra-long range spread spectrum communication and high interference immunity whist minimizing current consumption.

The S62F can achieve a sensitivity of over -137 dBm using a TCXO and related bill of materials. The high sensitivity combined with the integrated +22 dBm(max.) power amplifier yields industry leading link budget making it optimal for any low data rate application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques,solving the traditional design compromise between range,interference immunity and energy consumption.


Block diagram

              


Key-feature

Small size:9 mm x 8 mm x 1.26 mm (Typ.)
LoRa Transceiver Module, +22 dBm Max. RF output power
Programmable bit rate up to 62.5 kbps LoRa
Programmable bit rate up to 300 kbps FSK
High sensitivity: down to -137 dBm (@BW=125KHz, SF=12)
Embedded TCXO of 32MHz


For more information, or for sales inquiries, please contact AcSiP Technology Corp.

General Description

The AcSiP S62F transceiver features the LoRa long range modern that provides ultra-long range spread spectrum communication and high interference immunity whist minimizing current consumption.

The S62F can achieve a sensitivity of over -137 dBm using a TCXO and related bill of materials. The high sensitivity combined with the integrated +22 dBm(max.) power amplifier yields industry leading link budget making it optimal for any low data rate application requiring range or robustness.

LoRa also provides significant advantages in both blocking and selectivity over conventional modulation techniques,solving the traditional design compromise between range,interference immunity and energy consumption.

Part Number Frequency Range Spreading Factor Bandwidth Est. Sensitivity(dBm)
S62F 865~928MHz 5~12 7.8~500KHz -137@125kHz, SF12

Electrical Characteristics

Power Consumption Characteristics

Symbol Parameter Conditions Typ. Max. Unit
IDDSL Supply current in Sleep mode   0.57 0.7 uA
IDDSBR Supply current in Standby RC mode TCXO OFF 0.56   mA
IDDSBT Supply current in Standby XOSC mode TCXO ON 1.96   mA
IDDR Supply current in Receive mode RX Boosted LoRa 125kHz 5.6   mA
  Supply current in Transmit mode with RF SetPW = +22dBm 117 121  
IDDT impedance matching RF SetPW = +20dBm 103 107 mA
    RF SetPW = +17dBm 90 95  
    RF SetPW = +14dBm 80 86  

 

Pin Information Recommand Reflow Profile
   

 

 


Get Document Here

Item Description Download
Databrief S62F_Brief_Ver.03.pdf
Datasheet S62F_SPEC_Ver.D-website.pdf

For more information, or for sales inquiries, please contact AcSiP Technology Corp.

General Description

   

 

The EK-S62F board provides an affordable way for user to try out LoRaTM transceiver functionality or new concepts evaluation. It also compliance with XBee board formfactory to support sensor node application in wireless connectivity feature.


User can use it integrated existed host mcu controled by SPI to provide wireless connectivity feature in sensor node application for sure.


Package Information

Item Count Description
EK-S62F 1 SPI for host control interface
Antenna (option) 1 High band for LoRa WAN EU868, US915, AS923

 

SW & Tools Pin Definition
User can refer to application note to know how S62F usage in design phase  

SPI

DIO_1 / BUSY

RF_VC1 / RF_VC2


Get Document Here

Item Description Download
User guide EK-S62F_UserGuide_Ver.A.pdf
Application note S62F_ApplicationNote_Ver.D.pdf

For more information, or for sales inquiries, please contact AcSiP Technology Corp.

Item Description Download Link
Item Description Download Link
Contact
Theme item*:
Top